EN
RU
AR
CS
DA
NL
FR
DE
EL
IT
JA
KO
PL
PT
RO
ES
IW
SR
UK
HU
TR
FA
GA
BE
UZ
KU
LK-AMPD-S High Speed Amplified Microwave InGaAs Photodetector
- High Speed，Wide Bandwidth
- Incorporated Bias-T
- O/E Hybrid Integrated
- High Gain, Low Noise, Broadband
- Hermetically Sealed, SMA Connector
- Low Dark Current，high signal-to-noise ratio.
- Small Form Factor.
Description
LK-AMPD-S is a hybrid of an InGaAs photodiode and a low-noise amplifier, designed for a wide optical response from 1000 to 1650nm and offering a 15 dB RF gain. It delivers high-speed performance with bandwidths of 12GHz and 18GHz, and is powered by a +5V supply.
This module is compatible with standard single-mode 9/125μm fiber and has an SMA connector with a 50 ohm impedance match.
LK-AMPD-S is hermetically sealed for environmental protection and has a lightweight design, with a mass of less than 23 grams. It is compliant with the Restriction of Hazardous Substances (RoHS) Directive 2.0, ensuring environmental sustainability and adherence to stringent safety standards.
Specifications
| Typical & Absolute Maximum Rating | ||||
|---|---|---|---|---|
| Parameter | Sym. | Typ | Rating | Unit |
| Storage temperature range | TSTG | -45 ～ +85 | -55 ～ +100 | ℃ |
| Operating case temperature range | TC | 25 | -40 ～ +85 | ℃ |
| Bias Voltage | VR | +5 | +5 ～ +9 | V |
| Optical Input Power | Pin | 0 | +10 | dBm |
| Burn-out Optical Power | PB | - | +13 | dBm |
| Lead soldering temperature | Tp | 280（10s） | 330（10s） | ℃ |
| Electrical / Optical Characteristics ( TC = 22 ± 3 ℃ ) | ||||||
|---|---|---|---|---|---|---|
| Parameter | Sym | Test Condition | Parameter Values | Unit | ||
| Wavelength Range | λ | － | 1000 ～ 1650 | nm | ||
| Frequency Range | － | － | X - Band | Ku - Band | － | |
| Small Signal Bandwidth | f-3dB | TC = 22 ± 3℃ | 0. 3 ～ 12 | 0. 8 ～ 19.5 | GHz | |
| Responsivity | Re | VR =+5V, Pin =10mW | λ = 1310 nm | ≥ 0.8 | ≥ 0.85 | A/W |
| λ = 1550 nm | ≥ 0.85 | ≥ 0.8 | ||||
| Amplitude Flatness | A | TC =-45～+85 ℃ | ≤ ± 2 | dB | ||
| Saturation Optical Power | Ps | VR =+ 5 V, λ = 1550 nm AC Modulated | 10 | dBm | ||
| RF Signal Gain（Typical） | G | － | 15 ± 1 | dB | ||
| Saturation RF Output Power | Pout | － | +3 | dBm | ||
| Output VSWR | VSWR | － | ≤ 2 | － | ||
| Output Impedance | RL | － | 50 | Ω | ||
● Typical Response Curves
（ Fig . 1 X - Band Photodetector Frequency Response）
（ Fig . 2 Ku - Band Photodetector Frequency Response）
●Dimension and Pins ( Unit:mm[ inch] )
RF Connector：SMA
●Ordering Information
Sheet 1：
| Code | RF Signal Gain | Remark |
| S | 15 dB | Typical & Center Frequency |
Sheet 2：
| Code | Analog Bandwidth |
| X | 0. 3 ～ 12 GHz |
| Ku | 0. 8 ～ 19.5 GHz |
Sheet 3：
| Code | Connector Type | Remark |
| N | No Connector | Single-mode 9 / 125 μm fiber pigtail |
| A | FC / APC | |
| P | FC / PC |
● Precautions
The fiber bending radius no less than 20 mm for avoiding fiber damaged .
Be sure the fiber coupling facet is clean before connecting it to opto-circuit .
The suitable ESD protection is required in storage, transportation and using .
All of our standard photodetectors can be customized into modules！
Applications
Radar Information Processing
Electronic Warfare
Antenna Measurement
Fiber Optic Communications
Security and Surveillance
